ANYCUBIC Matte PLA Filament 1.75mm, FDM Printer Filament 1kg Spool (2.2 lbs), Dimensional Accuracy +/- 0.03 mm (1kg, Matte Black)

Name: ANYCUBIC Matte PLA Filament 1.75mm, FDM Printer Filament 1kg Spool (2.2 lbs), Dimensional Accuracy +/- 0.03 mm (1kg, Matte Black)
Brand: ANYCUBIC
Price: 35.98 USD
Availability: InStock

by ANYCUBIC

$35.98 - $35.98

$35.98

$35.98 - $35.98

$35.98

Description

𝐒𝐨𝐟𝐭 & 𝐄𝐥𝐞𝐠𝐚𝐧𝐭: Matte texture with fewer visible layer lines provides with soft touch and elegance. Macaron color enhances the prints' quality with higher level of detail. The 3D printing matte PLA filament was neat on the roll and leaves the spool easily without any crossed turns. Resulting in less thread pulling and twisting, no clogging, super under-extruding
𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐄𝐚𝐬𝐲 𝐒𝐮𝐩𝐩𝐨𝐫𝐭 𝐑𝐞𝐦𝐨𝐯𝐚𝐥: Anycubic 3D Printer PLA filament of 1.75mm diameter, minimum dimensional tolerance +/- 0.03 mm, which making filament outflow smoother, came out homogeneous. With a 3 years storage capacity, It has excellent mechanical properties with strong toughness and low shrinkage which makes it easier to remove the support of the prints
𝐂𝐥𝐨𝐠-𝐅𝐫𝐞𝐞 & 𝐁𝐮𝐛𝐛𝐥𝐞-𝐅𝐫𝐞𝐞: Designed and Manufactured with Clog-Free to ensure a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Larger spool inner diameter design makes feeding smoother
𝐖𝐢𝐝𝐞 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲: Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market, such as Prusa, Makerbot, MK3, Ender 3, CR 10, Kobra, Mega, Chiron, Monoprice FlashForge and more
𝐅𝐢𝐥𝐚𝐦𝐞𝐧𝐭 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melt through the nozzle. Note: When installing and changing filament, we highly suggest to preheat the nozzle firstly to reduce the nozzle block risk